Machine type 022-01 (2)
pneumatic press
Pneumatic press for riveting, eyeletting or punching holes in various workpieces and materials. The press is equipped with a compact cylinder. The pressure can be adjusted depending on the material thickness. With leading finger protection device.
Technical specifications
- Output: 50 cycles/minute
- Drive: compact cylinder
- Pressing force: on request
- Working height: approx. 1000 mm
- Weight: approx. 100 kg
- Space requirement: 800 x 600 x 1750 mm
- Air pressure: approx. 6 bar
- Projection: 200 mm freely cantilevered
Examples of use
- Paper and printing industry
- Textile industry
- Office supplies
- Leather goods industry
- Tarpaulin and tent industry
- Camping articles
- Suitcase industry
- Clothing industry
- etc.
More presses
Machine type 022-01 (2)
Pneumatic press for riveting, eyeletting or punching holes in various workpieces and materials. The press is equipped with a compact cylinder. The pressure can be adjusted depending on the material thickness. With leading finger protection device.
Machine type 022-01
Pneumatic press for riveting, eyeletting or punching holes in various workpieces and materials. The press is equipped with a very strong diaphragm cylinder (1200 kg). The pressure can be adjusted depending on the material thickness. With leading finger protection device.
Hand spindle press type 10-01
Simple press with manual operation for various workpieces and materials for attaching rivets, eyelets and buttons. The press has a small spindle pitch to achieve high pressure. Fastening holes in the…
Machine type 060-16 (2)
Electric riveting machine in special design for rivet pins for automatic insertion into pre-punched material. The rivet pins are fed automatically via a vibration conveyor and are positioned and held in place by a pusher.
Machine type 1007
Freely programmable 4-fold automatic belt riveter for the automatic insertion of four different self-piercing rivets in a single operation. The rivets are automatically fed and pressed in via a vibration conveyor.
Machine type 090-01 (4)
Electric riveting machine with bottom part feed, bottom punch movement and hold-down device for the automatic insertion of 2-part hollow rivets of various lengths into pre-punched material. The rivet bottoms are automatically…
Machine type 090-01 (3)
Electric riveting machine with bottom part feed and bottom punch movement for the automatic insertion of 2-part hollow rivets of various lengths into pre-punched material. The rivet bottoms are fed in automatically and are…
Machine type 090-01 (2)
Electric press stud machine with bottom part feed for automatic insertion. The press stud bases are fed in automatically and positioned and held in place by a steel strip pusher. The press studs are…
Machine type 090-01
Electric riveting machine with bottom part feed for automatic insertion of 2-part hollow rivets into pre-punched material. The rivet bottoms are fed automatically and positioned and held in place by a steel strip pusher.
Machine type 080-10
Electric 3-fold riveting machine for the automatic insertion of rivets in ring binder mechanisms. The rivets are automatically fed and pressed in via a driven sorting drum on the left, right and front.
Machine type 080-05
Electric 2-fold riveting machine for the automatic insertion of rivets into pre-punched material. The rivets are automatically fed and pressed in via a driven sorting drum on the left and right.
Machine type 065-20-2
Freely programmable 2-fold automatic belt riveter for the automatic insertion of two different self-piercing rivets in a single operation. The rivets are automatically fed and pressed in via a vibration conveyor.
Machine type 060-16-200V
Electric riveting machine in reinforced design for the automatic insertion of drilled rivets up to 55 mm in length into pre-punched material. The rivets are automatically fed and pressed in via a vibration conveyor.
Machine type 065-20
Freely programmable automatic belt riveter for the automatic insertion of self-piercing rivets. The rivets are automatically fed and pressed in via a vibration conveyor. Equipped with a quick-change device for the…
Machine type 060-16-420
Electric riveting machine with horn anvil for the automatic insertion of rivets into pre-punched material. The rivets are automatically fed and pressed in via a driven sorting drum. The pressure can be adjusted depending on the material thickness.
Machine type 060-16
Electric riveting machine for the automatic insertion of self-piercing rivets. The rivets are automatically fed and pressed in via a driven sorting drum. The pressure of the rivets is adjusted via a…