Machine type 033-02

Electric double eyeletting machine with fixed hole spacing

Electric double eyeletting machine with fixed hole spacing for the automatic insertion of eyelets into pre-punched material. The eyelets are automatically fed and pressed in via a driven sorting drum on the left and right. Both eyelets are inserted simultaneously. The pressure of the eyelets is set using an adjusting screw on the lower tool. With leading finger protection device, electric foot switch and piece counter.

Technical specifications

Weight: approx. 30 kg
Space requirement: 650 x 610 x 370 mm
Projection: approx. 165 mm freely cantilevered
Hole spacing: 80 – 130 mm stepless
Switch cabinet with PLC control
SSorting drum drive: Electric with minimum & maximum control and left/right rotation
Output: 120 cycles/minute
Drive: Gear brake motor
Sorting drive: Small gear motor
Working height: approx. 1000 mm
Weight: approx. 300 kg
Space requirement: 850 x 600 x 1750 mm
Air pressure: approx. 4-6 bar
Projection: 200 mm free cantilever
Hole spacing: Fixed

Examples of use

Metal processing
Steel goods
Helmet holders
Safety equipment
Camping equipment
Automotive industry
Electronics industry
Tarpaulin and tent industry
etc.

Usage Videos

Eyelet machine type 033-02

Sample images of helmet holders

More eyeletting machines

Machine type 035-40-300

Electric 4-fold eyeletting machine for the automatic insertion of self-piercing eyelets. The eyelets are automatically fed and pressed in via a driven sorting drum on the left, right and front. The insertion of all…

Machine type 035-02

Electric 2-fold eyeletting machine for the automatic insertion of self-piercing eyelets. The eyelets are automatically fed and pressed in via a driven sorting drum on the left and right. The setting of both…

Machine type 033-50

Electric oiling machine in special design with quick pressure adjustment. Mounted on a plate. For automatic insertion of self-piercing eyelets. The eyelets are automatically fed and pressed in via a vibration conveyor.

Machine type 033-30D

Electric double eyeletting machine for pre-punched material and sliding block for automatic insertion of eyelets. The eyelets are automatically fed and pressed in via a driven sorting drum on the left and right.

Machine type 033-20

Electric eyeletting machine with washer feed for pre-punched material for the automatic insertion of eyelets and washers into fabric binders or fabric. The washers are fed automatically and positioned by a steel strip pusher.

Machine type 033-10 (2)

Electric eyeletting machine with pre-punching device and washer feed for automatic insertion of eyelets and washers into fabric binders or fabric. The material is pre-punched by the pre-punching device. The disks are automatically…

Machine type 060-16 (2)

Electric riveting machine in special design for rivet pins for automatic insertion into pre-punched material. The rivet pins are fed automatically via a vibration conveyor and are positioned and held in place by a pusher.

Machine type 1007

Freely programmable 4-fold automatic belt riveter for the automatic insertion of four different self-piercing rivets in a single operation. The rivets are automatically fed and pressed in via a vibration conveyor.

Machine type 090-01 (4)

Electric riveting machine with bottom part feed, bottom punch movement and hold-down device for the automatic insertion of 2-part hollow rivets of various lengths into pre-punched material. The rivet bottoms are automatically…

Machine type 090-01 (3)

Electric riveting machine with bottom part feed and bottom punch movement for the automatic insertion of 2-part hollow rivets of various lengths into pre-punched material. The rivet bottoms are fed in automatically and are…

Machine type 090-01 (2)

Electric press stud machine with bottom part feed for automatic insertion. The press stud bases are fed in automatically and positioned and held in place by a steel strip pusher. The press studs are…

Machine type 090-01

Electric riveting machine with bottom part feed for automatic insertion of 2-part hollow rivets into pre-punched material. The rivet bottoms are fed automatically and positioned and held in place by a steel strip pusher.

Machine type 080-10

Electric 3-fold riveting machine for the automatic insertion of rivets in ring binder mechanisms. The rivets are automatically fed and pressed in via a driven sorting drum on the left, right and front.

Machine type 080-05

Electric 2-fold riveting machine for the automatic insertion of rivets into pre-punched material. The rivets are automatically fed and pressed in via a driven sorting drum on the left and right.

Machine type 065-20-2

Freely programmable 2-fold automatic belt riveter for the automatic insertion of two different self-piercing rivets in a single operation. The rivets are automatically fed and pressed in via a vibration conveyor.

Machine type 060-16-200V

Electric riveting machine in reinforced design for the automatic insertion of drilled rivets up to 55 mm in length into pre-punched material. The rivets are automatically fed and pressed in via a vibration conveyor.

Machine type 065-20

Freely programmable automatic belt riveter for the automatic insertion of self-piercing rivets. The rivets are automatically fed and pressed in via a vibration conveyor. Equipped with a quick-change device for the…

Machine type 060-16-420

Electric riveting machine with horn anvil for the automatic insertion of rivets into pre-punched material. The rivets are automatically fed and pressed in via a driven sorting drum. The pressure can be adjusted depending on the material thickness.

Machine type 060-16

Electric riveting machine for the automatic insertion of self-piercing rivets. The rivets are automatically fed and pressed in via a driven sorting drum. The pressure of the rivets is adjusted via a…