Machine Type 060_16

Electric riveting machine

Elektrische Nietmaschine

Description of the machine:
Electric riveting machine for automatic insertion of self-piercing rivets. The rivets are automatically fed and pressed in via a driven sorting drum. The pressure adjustment of the rivets is done via an adjusting screw on the lower tool. With leading finger protection, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Performance: 120 cycles/minute
Drive: Geared brake motor
Sorting drive: Small gear motor
Working height: Approx. 1000 mm
Weight: Approx. 200 kg
Space requirement: 800 x 600 x 1750 mm
Air pressure: Approx. 4-6 bar
Projection: 200 mm freely projecting

Application examples:
Automotive industry, luggage manufacturing, paper and printing industry, textile industry, office supplies, shoe industry, leather goods industry, etc.

Print

Machine Type 060_16 (2)

Electric riveting machine in special design for rivet pins

060 16 2 in sonderausführung

060 16 3 in sonderausfhrung

Description of the machine:
Electric riveting machine in special design for rivet pins for automatic insertion into pre-punched material. The rivet pins are automatically fed via a vibratory conveyor and brought into position and held by a pusher. The pressure can be adjusted depending on the material thickness. Electronic rivet pin sensing for level control in the feed tube. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Bottom parts feed: Pneumatic, can be switched off
Performance: 60 cycles/minute
Drive: Gear brake motor
Sorting drive: Vibratory conveyor
Working height: Approx. 1100 mm
Weight: Approx. 200 kg
Space requirement: 800 x 600 x 1750 mm
Air pressure: Approx. 6 bar
Projection: 100 mm freely projecting

Application examples:
Metal processing, steel goods, helmet holders, safety equipment, automotive industry, camping articles, etc.

Sample images helmet mounts

Print

Machine Type 060_16_200V

Electric riveting machine in reinforced execution

Elektrische Nietmaschine in verstärkter Ausführung

Description of the machine:
Electric riveting machine in reinforced execution for automatic insertion of drilling rivets up to 55 mm length in pre-punched material. The rivets are automatically fed and pressed in via a vibratory conveyor. The pressure of the rivets is adjusted via an adjusting screw on the lower tool. With leading finger protection device and foot pedal.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Performance: 100 cycles/minute
Drive: Geared brake motor
Sorting drive: Vibratory conveyor
Working height: Approx. 1100 mm
Weight: Approx. 250 kg
Space requirement: 800 x 1000 x 1750 mm
Air pressure: Approx. 6 bar
Projection: 200 mm freely projecting

Application examples:
Automotive industry, wood industry, camping articles, metal processing, etc.

Print

Machine Type 060_16_420

Electric riveting machine with horn-anvil

060 16 420

Description of the machine:
Electric riveting machine with horn-anvil for automatic insertion of rivets into pre-punched material. The rivets are automatically fed and pressed in via a driven sorting drum. The pressure can be adjusted according to the material thickness. With leading finger protection, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Performance: 120 cycles/minute
Drive: Geared brake motor
Sorting drive: Small gear motor
Working height: Approx. 1000 mm
Weight: Approx. 250 kg
Space requirement: 800 x 600 x 1750 mm
Air pressure: Approx. 4-6 bar
Projection: 400 mm freely projecting

Application examples:
Sheet metal industry, automotive industry, shoe industry, baggage production, etc.

Print

Machine Type 065_20

Freely programmable belt riveting machine

065 20

Description of the machine:
Freely programmable belt riveting machine for automatic insertion of self-piercing rivets. The rivets are automatically fed and pressed in via a vibratory conveyor. Equipped with a quick-change device for the rivet feeders and tools. The pressure of the rivets is adjusted via an adjusting screw on the lower tool. The X and Y-axes are programmable via a graphics program. The insertion device of the leather goods is always centred. With protective housing, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control and operating panel
Sorting drum drive: Electrically with minimum & maximum control and rivet fall-through detection
Performance: 120 cycles/minute
Drive: Geared brake motor
Sorting drive: Vibratory conveyor 
Cycle feed: Stepper motors 
Insertion device: Belt width up to 60 mm 
Working height: Approx. 1000 mm

Weight: Approx. 250 kg
Space required: 1000 x 1800 x 1500 mm
Air pressure: Approx. 6 bar 
Projection: 200 mm freely projecting 

Application examples:
Belt industry, fashion accessories, dog collars, dog leashes, etc.

Sample images belt

Print

Machine Type 065_20_2

Freely programmable 2-fold belt riveting machine

065-20-2

Description of the machine:
Freely programmable 2-fold belt riveting machine for automatic insertion of two different self-piercing rivets in one operation. The rivets are automatically fed and pressed in via a vibratory conveyor. Both rivets are inserted automatically. The rivet units can be switched off or on individually via the operating panel. Equipped with a quick-change device for the rivet feeders and tools. The pressure of the rivets is adjusted via an adjusting screw on the lower tool. The X and Y-axes are programmable via a graphics program. The insertion device of the leather goods is always centred. With protective housing, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control and operating panel
Sorting drum drive: Electrically with minimum & maximum control and rivet fall-through detection
Performance: 120 cycles/minute
Drive: Geared brake motor
Sorting drive: Vibratory conveyor 
Cycle feed: Stepper motors 
Insertion device: Belt width up to 60 mm 
Working height: Approx. 1000 mm

Weight: Approx. 250 kg
Space required: 1000 x 2000 x 1500 mm
Air pressure: Approx. 6 bar 
Projection: 200 mm freely projecting 

Application examples:
Belt industry, fashion accessories, dog collars, dog leashes, etc.

Sample images belt

Print

Machine Type 080_05

Electric 2-fold riveting machine

Elektrische 2-fach Nietmaschine

Description of the machine:
Electric 2-fold riveting machine for automatic insertion of rivets into pre-punched material. The rivets are automatically fed and pressed in via one driven sorting drum each on the left and right. Both rivets are inserted at the same time. The rivet units can be switched off or on individually via the operating panel. The pressure of the rivets is adjusted via an adjusting screw on the lower tool. The hole spacing can be continuously adjusted in the range of 50 - 550 mm. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with SPS-control and operating panel
Sorting drum drive: Electric with minimum and maximum control
Performance: 120 cycles/minute
Drive: Gear brake motor
Sorting drive: Small gear motor
Working height: Approx. 1000 mm
Weight: Approx. 350 kg
Space required: 1200 x 1200 x 1750 mm
Air pressure: Approx. 4-6 bar
Projection: 200 mm freely projecting
Hole spacing: 50 - 550 mm infinitely variable

Application examples:
Automotive industry, building supplies, luggage manufacturing, paper and printing industry, textile industry, folder industry, office supplies, etc.

Print

Machine Type 080_10

Electric 3-fold riveting machine

Elektrische 3-fach Nietmaschine

Description of the machine:
Electric 3-fold riveting machine for automatic insertion of rivets in ring binder mechanisms. The rivets are automatically fed and pressed in via one driven sorting drum each on the left, right and front. All rivets are inserted at the same time. The rivet units can be switched off or on individually via the operating panel. The pressure of the rivets is adjusted via an adjusting screw on the lower tool. The hole spacing can be continuously adjusted in the range of 50 - 550 mm. With leading finger protection device, electric foot switch or 3-point release and piece counter.

Technical data:
Control cabinet with SPS-control and operating panel
Sorting drum drive: Electric with minimum and maximum control
Performance: 120 cycles/minute
Drive: Gear brake motor
Sorting drive: Small gear motor
Working height: Approx. 1000 mm
Weight: Approx. 380 kg
Space required: 1200 x 1200 x 1750 mm
Air pressure: Approx. 4-6 bar
Projection: 420 mm freely projecting
Hole spacing: 50 - 550 mm infinitely variable

Application examples:
Automotive industry, luggage manufacturing, paper and printing industry, textile industry, folder industry, office supplies, etc.

Print

Machine Type 090_01

Electric riveting machine with bottom part feed

090 01 1

Description of the machine:
Electric riveting machine with bottom part feed for automatic insertion of 2-part hollow rivets into pre-punched material. The rivet bottom parts are fed automatically and brought and held in position by a steel belt pusher. The rivet tops are also automatically fed and automatically inserted together with the rivet bottoms into the pre-punched material. Depending on the material thickness, the pressure can be adjusted. Electronic rivet top and bottom part sensing for level control in the feed rail. Rivet bottom parts can be switched off. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Bottom parts feed: Pneumatic, can be switched off
Performance: 80 cycles/minute
Drive: Geared brake motor 
Sorting drive: Small gear motor
Working height: Approx. 900 - 1200 mm infinitely variable
Weight: Approx. 250 kg
Space requirement: 800 x 1000 x 1750 mm 
Air pressure: Approx. 6 bar 
Projection: 120 mm freely projecting

Application examples:
Textile industry, protective equipment, shoe industry, clothing industry, leather goods industry, packaging industry, etc.

Sample images shoe pieces

Print

Machine Type 090_01 (2)

Electric push button machine

090 01 3

Description of the machine:
Electric push button machine with bottom part feed for automatic insertion. The push button bottom parts are fed automatically and brought and held in position by a steel belt pusher. The push buttons are also automatically fed and automatically inserted together with the push button bottoms. Depending on the material thickness, the pressure can be adjusted. Electronic push button and push button bottom part sensing for level control in the feed rail. Push button bottom parts can be switched off. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Bottom parts feed: Pneumatic, can be switched off
Performance: 80 cycles/minute
Drive: Geared brake motor 
Sorting drive: Small gear motor
Working height: Approx. 1000 mm
Weight: Approx. 250 kg
Space requirement: 800 x 600 x 1750 mm 
Air pressure: Approx. 6 bar 
Projection: 300 mm freely projecting

Application examples:
Textile industry, protective equipment, shoe industry, clothing industry, leather goods industry, paper and printing industry, packaging industry, folder production, etc.

Sample images maps

Print

Machine Type 090_01 (3)

Electric riveting machine with bottom part feed and bottom punch movement

090 01 4

090 01 5

Description of the machine:
Electric riveting machine with bottom part feed and bottom punch movement for automatic insertion of 2-part hollow rivets of different lengths into pre-punched material. The rivet bottom parts are fed automatically and brought and held in position by a steel belt pusher. The rivet tops are also automatically fed and automatically inserted flush together with the rivet bottoms into the pre-punched material. Depending on the material thickness, the pressure can be adjusted. Electronic rivet top and bottom part sensing for level control in the feed rail. Rivet bottom parts can be switched off. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Bottom parts feed: Pneumatic, can be switched off
Performance: 100 cycles/minute
Drive: Servo motor 
Sorting drive: Small gear motor
Working height: Approx. 930 mm
Weight: Approx. 250 kg
Space requirement: 800 x 1000 x 1750 mm 
Air pressure: Approx. 6 bar 
Projection: 65 mm freely projecting
Knife handle thickness: 10 - 18 mm

Application examples:
Cutlery industry, metalware industry, metal processing, steelware, etc.

Sample images knife

Print

Machine Type 090_01 (4)

Electric riveting machine with bottom part feed, bottom punch movement and hold-down device

090 01 6

Description of the machine:
Electric riveting machine with bottom part feed, bottom punch movement and hold-down device for automatic insertion of 2-part hollow rivets of different lengths into pre-punched material. The rivet bottom parts are fed automatically and brought and held in position by a steel belt pusher. The rivet tops are also automatically fed and automatically inserted flush together with the rivet bottoms into the pre-punched material. The fixation of the handles takes place via a hold-down device. Depending on the material thickness, the pressure can be adjusted. Electronic rivet top and bottom part sensing for level control in the feed rail. Rivet bottom parts can be switched off. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Bottom parts feed: Pneumatic, can be switched off
Performance: 60 cycles/minute
Drive: Servo motor 
Sorting drive: Small gear motor
Working height: Approx. 930 mm
Weight: Approx. 350 kg
Space requirement: 800 x 1200 x 1750 mm 
Air pressure: Approx. 6 bar 
Projection: 60 mm freely projecting
Knife handle thickness: 10 - 25 mm
Pressure adjustment range of the riveting anvil: 100 mm with digital position indicator

Application examples:
Cutlery industry, metalware industry, metal processing, steelware, etc.

Sample images knife

Print

Machine Type 1007

Freely programmable 4-fold belt riveting machine

1007

Description of the machine:
Freely programmable 4-fold belt riveting machine for automatic insertion of four different self-piercing rivets in one operation. The rivets are automatically fed and pressed in via a vibratory conveyor. The setting of all rivets is automatic. The rivet units can be switched off or on individually via the operating panel. Equipped with a quick-change device for the rivet feeders and tools. The pressure of the rivets is adjusted via an adjusting screw on the lower tool. The X and Y-axes are programmable via a graphics program. The insertion device of the leather goods is always centred. With protective housing, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control and operating panel
Sorting drum drive: Electrically with minimum & maximum control and rivet fall-through detection
Performance: 120 cycles/minute
Drive: Servo motor 
Sorting drive: Vibratory conveyor 
Cycle feed: Stepper motors 
Insertion device: Belt width up to 60 mm 
Working height: Approx. 1000 mm

Weight: Approx. 300 kg
Space required: 1200 x 2500 x 1750 mm
Air pressure: Approx. 6 bar 
Projection: 200 mm freely projecting 

Application examples:
Belt industry, fashion accessories, dog collars, dog leashes, etc.

Sample images belt

Print

Walter Winter Verbindungstechnik GmbH & Co.KG
Kuhnbergstraße 2 | 73037 Göppingen | phone: +49 (0)7161 939803 | fax: +49 (0)7161  939805 | e-mail: info@winter-verbindungstechnik.de

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.