Machine Type 090_01 (4)

Electric riveting machine with bottom part feed, bottom punch movement and hold-down device

090 01 6

Description of the machine:
Electric riveting machine with bottom part feed, bottom punch movement and hold-down device for automatic insertion of 2-part hollow rivets of different lengths into pre-punched material. The rivet bottom parts are fed automatically and brought and held in position by a steel belt pusher. The rivet tops are also automatically fed and automatically inserted flush together with the rivet bottoms into the pre-punched material. The fixation of the handles takes place via a hold-down device. Depending on the material thickness, the pressure can be adjusted. Electronic rivet top and bottom part sensing for level control in the feed rail. Rivet bottom parts can be switched off. With leading finger protection device, electric foot switch and piece counter.

Technical data:
Control cabinet with PLC-control
Sorting drum drive: Electrically with minimum and maximum control
Bottom parts feed: Pneumatic, can be switched off
Performance: 60 cycles/minute
Drive: Servo motor 
Sorting drive: Small gear motor
Working height: Approx. 930 mm
Weight: Approx. 350 kg
Space requirement: 800 x 1200 x 1750 mm 
Air pressure: Approx. 6 bar 
Projection: 60 mm freely projecting
Knife handle thickness: 10 - 25 mm
Pressure adjustment range of the riveting anvil: 100 mm with digital position indicator

Application examples:
Cutlery industry, metalware industry, metal processing, steelware, etc.

Sample images knife

Print